L-CKE Worm Gear Hydraulic Oil Additive Package Antioxidants BSD78560

BSD78560

Worm Gear Oil Additive Package

This product is formulated with various additives such as high-quality anti-wear agents and

high-efficiency antioxidants. The worm gear oil formulated with this composite agent has

excellent resistance to extreme pressure, wear, oxidation, and rust.

Recommended Dosage (wt%)

BSD-78560 worm gear oil composite agent, adding an appropriate amount of emulsifier to

base oils of different viscosities, stirring evenly at 60-75 ℃, and then adding 1.5% of the

composite agent, can prepare L-CKE worm gear oil: adding 2.0% of the composite agent

can prepare L-CKE/P worm gear oil.

Typical Inspections

PS:3.8% BSD78662 + 96.2% base oil (40% 150BS + 60% 500N)

Product Appearance

Packaging and Storage

200L metal drum packaging, stored in a dry, clean and ventilated warehouse, storage temperature

for a long time not more than 45 ℃.This product is not flammable, explosive and non-corrosive.

It is equivalent to general petroleum products in terms of safety, environmental protection and use.

For application, avoid contact with strong oxidizer.Rinse clean with soapy water when touching the skin.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).

L-CKE hydraulic oil additive package

Worm hydraulic oil additive package

Worm antioxidants oil additive

L-CKE Worm Gear Hydraulic Oil Additive Package Antioxidants BSD78560 Images